硬质合金枪钻Solid Carbide Gun Drills

它的刀杆和刀头部位由整支的合金棒料研磨而成，中间没有焊接点。深空钻机床针对不同的装夹方式，钻星刀具采用相应的刀柄款式用来满足各种不同品牌的深空钻机床装夹。
因刀头和刀杆为整体硬质合金，在实际生产过程中在机床上一次磨削完成，所以刀具整体的直线度会非常的好，而且刀头和刀杆不进行焊接，较之焊接式和镶刀粒枪钻，不存在因为焊接而产生的热应力，从而使得枪钻在日常使用过程中稳定性好，降低因为焊接不牢而产生的掉头现象，综其上述固有优点，使得整体硬质合金枪钻在使用过程中有更优异的孔加工稳定性，高效及使用寿命更长等优点。钻星枪钻硬度高、刚性好、精度准、经久耐用，性价比高。
Its shank and head are made of a whole carbide rod material ground without any brazing points in the middle. The deep space drilling machine tool is designed for different clamping methods, and Drillstar tools adopt corresponding tool handle styles to meet the clamping requirements of various brands of deep hole drilling machine tools.

Due to the fact that the cutting head and shank are made of integral hard alloy, which are ground in one operation on the machine tool during actual production, the overall straightness of the cutting tool is very good. Moreover, the cutting head and shank are not brazed, and compared to brazed and embedded gun drills, there is no thermal stress caused by brazing, which makes the gun drills stable in daily use and reduces the phenomenon of turning due to poor welding. Taking into account the above inherent advantages, The overall hard alloy gun drill has advantages such as better hole processing stability, high efficiency, and longer service life during use. Drillstar gun drills have high hardness, good rigidity, accurate accuracy, durability, and high cost-effectiveness.

优势：Advantages
更高的强度和刚度
刀具寿命更长
最高生产率和更高的渗透率
Higher strength and stiffness
Longer tool life
Maximum productivity and higher penetration rate

整硬枪钻尺寸直径从0.90mm-12.00mm
最长可达360mm
Solid carbide gun drills range
Diameter from 0.9mm to 12.00mm
Max length 360mm

枪钻领域fields：
枪钻在造船、汽车、发动机、机车、军工、化工机械、油嘴油泵、医疗器械、模具行业、矿山机械及液压件等行业得到广泛应用。
Gun drills are widely used in industries such as shipbuilding, automobiles, engines, locomotives, military industry, chemical machinery, nozzle oil pumps, medical equipment, mold industry, mining machinery, and hydraulic components.